Sooner or later, any person can face problems such as the faucet breaking in the bathroom – Αποφράξεις Αντωνίου -, especially the water switch in the shower. Modern faucets are quite simple, so repairing a small technical damage can keep almost anyone with minimal skills in the field. To eliminate the damage, you need to have a standard set of tools.
Types and characteristics of switches
There are three main types of switches.
This is a type of switch from a gander to a shower, in which there is a special mechanism – a valve. In this mechanism, as the special rod rotates, the flow and pressure of the water are regulated. Today, this type is used less and less, because it is annoying and impractical.
The switch looks like a reel counter, but has a useful feature that makes it widely used. Its feature is a spring that holds the rod. When the switch is raised, it stretches and tightens the bar, thanks to which the water pressure begins to flow. When you turn the valve, the water from the shower goes back to the main mixer.
This is a modern shower switch. The locking mechanism (cartridge) regulates the pressure flow, changing its position. This type is divided into two subspecies: ceramic and ball.
It is the most modern look. It works thanks to the push of a special button, which is automatic on some of the most modern mixers. Automatically changes the water flow when it is off.
Causes and types of faults
If the switch is broken, you need to find a break point. There are many reasons why the switch does not work or does not work well. From all the main can be identified.
Use of old materials
In many cases, the use of new sample materials provides many more benefits. For example, using silicone sponges offers more practical benefits than using the same rubber pads. To observe less frequent breakage and leakage of the crane, it is better to use more modern materials.
The use of degraded products
Today there is a huge selection of mixers with various switches on the market. However, most of these products are degraded, which creates a lot of problems. It is worth buying products of well-known brands that are tested and meet all quality standards.
In many cases, the damage is due to the water. Most water supply pipes are used for a long time. Because of this, dirt accumulates inside them, which gradually reaches the apartments. If dirt enters the mixer, it may cause complete or partial breakage. To avoid this, you can install special filters in the water that will stop the dirt.
The water may not be dirty, but it is hard. Stiffness also has a significant effect on the overall condition of all plumbing.
Each type of water switch can have special reasons for disassembly.
- Frame: Poor fastening of the rotating rod, wear of the mechanism elements, wear or poor connection of the base.
- Cork: poor application of cork on the switch, mechanical damage to the button.
- Cartridge (ceramic and bead) : damage to the mechanism, deletion of joints (ceramic plates or sphere and plate), rupture of clamps.
- Exhaust: The button type switch may have a broken or strong spring tension, seal deterioration, improper button position.
How to repair the switch
Mixers and repair switches can be made by hand. Depending on the type of switch and the type of fault, it is necessary to perform different types of work. Call Αποφράξεις Αντωνίου in order to solve your problem.
Prevention and tips
To avoid such problems in the future, it is necessary to constantly see the switch and the faucet as a whole. It is necessary to constantly monitor the quality of water supplied to the house, if necessary, install special filters. It is necessary to use only high quality materials from proven manufacturers. High quality mixers will last longer. They will not cause permanent problems.
It is necessary to treat every kind of problem carefully. The more accurate the handling of the plumbing, the longer it will take. When repairing the switches and analyzing the mixer, you must handle each component carefully. It is recommended to do everything by hand, so that the tools do not spoil either the external or internal appearance.
If water quality or pressure deteriorates, the ventilator should be checked. This is a filter that is located on the hunter’s edge. It has the ability to clog with various dirt particles. When buying new parts, it is best to take the old one with you to the store so that it is easier for the seller to find the right product and not make a mistake. To find the cause of a leak, the location of the water leak and the type break, you can unscrew the button and turn on the water. The leak will be immediately visible.
When a water switch on a shower hose leaks or malfunctions, any person with little experience in such work can correct the problem, repair and return the sanitary equipment to normal. Don’t forget safety, because when working with plumbing, it is especially important. Trust Αντωνίου Αποφράξεις with your plumbing problems.
Read more about Αποφράξεις Αντωνίου:
- ΑΠΟΦΡΑΞΕΙΣ ΑΘΗΝΑ
- ΑΠΟΦΡΑΞΕΙΣ ΑΙΓΑΛΕΩ
- ΑΠΟΦΡΑΞΕΙΣ ΑΛΙΜΟΣ
- ΑΠΟΦΡΑΞΕΙΣ ΑΛΣΟΥΠΟΛΗ
- ΑΠΟΦΡΑΞΕΙΣ ΑΜΠΕΛΟΚΗΠΟΙ
- Αποφράξεις Αμφιάλη
- Αποφράξεις Ανάβυσσος
- Αποφράξεις Ανθούσα
- Αποφράξεις Άνοιξη
- Αποφράξεις Άνω Λιόσια